Skip to main content

Ddr2 dd3 and ddr4 ram selection and upgrade key points


Your Laptop needs upgrade?
You don't know right?
I will explain when your Laptop needs upgrade.
1. When your Laptop is nearly 3 or more years old. Why? Because every electronic device has its lifetime and for electronic its max three years recommend.
2. When Operating system upgrades or new releases are out, its recommend to check upgrade hardware requirements. If these are compatible then it's ok or you have to upgrade some devices.
3. Working software is also a cause where you have to consider hardware upgrades because their requirements are pretty much higher than the company default configuration.

What should have to upgrade in hardware?
This much easier to find because anything is causing that condition is always has a minimum or maximum boundaries.
1. If you need processing fast its usually for gaming and digital works you need to upgrade the processor or mostly done by ram upgrade.
2. If you need storage then its for harddisk upgrade for more space in storage.

Comments

Popular posts from this blog

Toshiba bios password removal for latest models

http://www.laptoprefix.com/viewforum.php?f=25 Satellite P100 & Satellite Pro P100 Open Wi-Fi Cover Remove Mini Card Wi-Fi card Locate & Short Out JP8 for 5 Seconds Remove short and turn on NO BOOT Press & Hold Power button to turn off Turn on again & password is cleared Satellite L10, L20, L30 & Satellite Pro L20 Open Wi-Fi Cover Locate & Short Out JP1 for 15 Seconds (Satellite L10) Satellite L20/Pro L20 short out G1 Satellite M100 & Tecra A6 Open Memory Cover Remove Memory Remove Black plastic insulation Locate & Short CMOS CLR1 for 15 Seconds NOTE: All the following models use the same password removal process. Satellite: 17xx Series, 1000, 1110,1130, 1200, 1900, 2430, 3000 P20,P30, P33, A30, A70, A80, M40X, M50,M60, M70, M100 Tecra A3/S2, A5, A6 The jumper is always located under or near the memory modules Depending on the model the jumper could be labelled J1, J2, J5, J7, J9 or CMOS CLR1 (M100 & A6) S

HP/Compaq led errors

HP/Compaq : "The following table illustrates the meaning of blink codes used on some notebooks with EFI environment. The blink or beep codes on your computer may have different meanings. When you contact HP for support, the agent needs to know the model of your computer and may ask you about blinking LEDs or beeping tones to help troubleshoot a startup problem.Meaning of Sample Blink Codes for some EFI Notebooks Number of Blinks or BeepsLocation of Blinking LEDsComponent Being CheckedError Condition Continuous glowBattery power LEDBatteryThe AC adapter is attached and the battery is charging, but does not yet have sufficient charge to power the notebook. 1time---Caps Lock/Num Lock-----CPU------------------CPU not functional 2time---Caps Lock/Num Lock-----BIOS----------------BIOS corruption failure 3time---Caps Lock/Num Lock-----Memory-------------Module error not functional 4time---Caps Lock/Num Lock-----Graphics--------------Graphics controller not functional 5time---Caps Lock/Nu

Dell bios password removal for latest models

RESET Dell  Bioses Reset Dell 15R-N5110 Bios   Add caption remove motherboard from you laptop. connect power and turn on. short G2201 only one time.its shout down. remove power and assemble your laptop again Then go to bios by press F2. note: This instructions for help only and for professionals only. general users do not try this.        Don't short G2201 two times or in even count.it will show you password prompt again. RESET DELL 1545 Bios 1545 mobo  with Graphics   1545 without Graphics remove motherboard from you laptop. connect power and turn on. short G49 only one time.its shout down. remove power and assemble your laptop again Then go to bios by press F2. note: This instructions for help only and for professionals only. general users do not try this.          1545 without graphics can be reset only to remove wifi cover.        Don't short G49 two times or in even count.it will show you password prompt again.