Skip to main content

Dell led codes




Keyboard Status Lights

numpad - caps lock - scrol lock (light code given in serial)

The green lights located above the keyboard indicate the following:
Turns on when the numeric keypad is enabled.
Turns on when the Caps Lock function is enabled.
Turns on when the Scroll Lock function is enabled.

LED Error Codes

The following table shows the possible LED codes that may display in a no-POST situation.
Appearance
Description
Next Step
ON-FLASH-FLASH
No SODIMMs are installed
  1. Install supported memory modules.
  2. If memory is already present, reseat the module(s) one at time in each slot.
  3. Try known good memory from another computer or replace the memory.
  4. Replace the system board.
FLASH-ON-ON
System board error
  1. Reseat the processor.
  2. Replace the system board.
  3. Replace the processor.
FLASH-ON-FLASH
Display panel error
  1. Reseat the display cable.
  2. Replace the display panel.
  3. Replace the video card/system board.
OFF-FLASH-OFF
Memory compatibility error
  1. Install compatible memory modules.
  2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules.
  3. Replace the memory.
  4. Replace the system board.
ON-FLASH-ON
Memory is detected but has errors
  1. Reseat the memory.
  2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules.
  3. Replace the memory.
  4. Replace the system board.
OFF-FLASH-FLASH
Modem error
  1. Reseat the modem.
  2. Replace the modem.
  3. Replace the system board.
FLASH-FLASH-FLASH
System board error
  1. Replace the system board.
FLASH-FLASH-OFF
Option ROM error
  1. Reseat the device.
  2. Replace the device.
  3. Replace the system board.
OFF-ON-OFF
Storage device error
  1. Reseat the hard drive and optical drive.
  2. Test the computer with just the hard drive and just the optical drive.
  3. Replace the device that is causing the failure.
  4. Replace the system board.
FLASH-FLASH-ON
Video card error
Replace the system board.

Comments

Post a Comment

Popular posts from this blog

Toshiba bios password removal for latest models

http://www.laptoprefix.com/viewforum.php?f=25 Satellite P100 & Satellite Pro P100 Open Wi-Fi Cover Remove Mini Card Wi-Fi card Locate & Short Out JP8 for 5 Seconds Remove short and turn on NO BOOT Press & Hold Power button to turn off Turn on again & password is cleared Satellite L10, L20, L30 & Satellite Pro L20 Open Wi-Fi Cover Locate & Short Out JP1 for 15 Seconds (Satellite L10) Satellite L20/Pro L20 short out G1 Satellite M100 & Tecra A6 Open Memory Cover Remove Memory Remove Black plastic insulation Locate & Short CMOS CLR1 for 15 Seconds NOTE: All the following models use the same password removal process. Satellite: 17xx Series, 1000, 1110,1130, 1200, 1900, 2430, 3000 P20,P30, P33, A30, A70, A80, M40X, M50,M60, M70, M100 Tecra A3/S2, A5, A6 The jumper is always located under or near the memory modules Depending on the model the jumper could be labelled J1, J2, J5, J7, J9 or CMOS CLR1 (M100 & A6) S

HP/Compaq led errors

HP/Compaq : "The following table illustrates the meaning of blink codes used on some notebooks with EFI environment. The blink or beep codes on your computer may have different meanings. When you contact HP for support, the agent needs to know the model of your computer and may ask you about blinking LEDs or beeping tones to help troubleshoot a startup problem.Meaning of Sample Blink Codes for some EFI Notebooks Number of Blinks or BeepsLocation of Blinking LEDsComponent Being CheckedError Condition Continuous glowBattery power LEDBatteryThe AC adapter is attached and the battery is charging, but does not yet have sufficient charge to power the notebook. 1time---Caps Lock/Num Lock-----CPU------------------CPU not functional 2time---Caps Lock/Num Lock-----BIOS----------------BIOS corruption failure 3time---Caps Lock/Num Lock-----Memory-------------Module error not functional 4time---Caps Lock/Num Lock-----Graphics--------------Graphics controller not functional 5time---Caps Lock/Nu